? semiconductor components industries, llc, 2012 july, 2012 ? rev. 3 1 publication order number: NTLUS3A18PZ/d NTLUS3A18PZ power mosfet ? 20 v, ? 8.2 a, single p ? channel, 2.0x2.0x0.55 mm cool udfn package features ? udfn package with exposed drain pads for excellent thermal conduction ? low profile udfn 2.0x2.0x0.55 mm for board space saving ? ultra low r ds(on) ? esd diode ? protected gate ? these devices are pb ? free, halogen free/bfr free and are rohs compliant applications ? optimized for power management applications for portable products, such as cell phones, media tablets, pmp, dsc, gps, and others ? battery switch ? high side load switch maximum ratings (t j = 25 c unless otherwise stated) parameter symbol value unit drain-to-source voltage v dss ? 20 v gate-to-source voltage v gs 8.0 v continuous drain current (note 1) continuous drain current (note 1) steady state t a = 25 c i d ? 8.2 a t a = 85 c ? 5.9 t 5 s t a = 25 c ? 12.2 power dissipa- tion (note 1) steady state t a = 25 c p d 1.7 w t 5 s t a = 25 c 3.8 continuous drain current (note 2) steady state t a = 25 c i d ? 5.1 a t a = 85 c ? 3.7 power dissipation (note 2) t a = 25 c p d 0.7 w pulsed drain current tp = 10 s i dm ? 25 a operating junction and storage temperature t j , t stg -55 to 150 c esd (hbm, jesd22 ? a114) v esd 2000 v source current (body diode) (note 2) i s ? 1.7 a lead temperature for soldering purposes (1/8 from case for 10 s) t l 260 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. surface mounted on fr4 board using 1 in sq pad size (cu area = 1.127 in sq [2 oz] including traces). 2. surface-mounted on fr4 board using the minimum recommended pad size of 30 mm 2 , 2 oz. cu. http://onsemi.com p ? channel mosfet ? 20 v 25 m @ ? 2.5 v 18 m @ ? 4.5 v r ds(on) max i d max v (br)dss mosfet udfn6 ( cool ) case 517bg see detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. ordering information ac = specific device code m = date code = pb ? free package ac m 1 50 m @ ? 1.8 v marking diagram 90 m @ ? 1.5 v (top view) (*note: microdot may be in either location) pin 1 ? 8.2 a d s g pin connections d s
NTLUS3A18PZ http://onsemi.com 2 thermal resistance ratings parameter symbol max unit junction-to-ambient ? steady state (note 3) r ja 72 c/w junction-to-ambient ? t 5 s (note 3) r ja 33 junction-to-ambient ? steady state min pad (note 4) r ja 189 3. surface-mounted on fr4 board using 1 in sq pad size (cu area = 1.127 in sq [2 oz] including traces). 4. surface-mounted on fr4 board using the minimum recommended pad size of 30 mm 2 , 2 oz. cu. electrical characteristics (t j = 25 c unless otherwise specified) parameter symbol test condition min typ max units off characteristics drain-to-source breakdown voltage v (br)dss v gs = 0 v, i d = ? 250 a ? 20 v drain-to-source breakdown voltage temperature coefficient v (br)dss /t j i d = ? 250 a, ref to 25 c +10 mv/ c zero gate voltage drain current i dss v gs = 0 v, v ds = ? 20 v t j = 25 c ? 1.0 a gate-to-source leakage current i gss v ds = 0 v, v gs = 5.0 v 5 a on characteristics (note 5) gate threshold voltage v gs(th) v gs = v ds , i d = ? 250 a ? 0.4 ? 1.0 v negative threshold temp. coefficient v gs(th) /t j 3.0 mv/ c drain-to-source on resistance r ds(on) v gs = ? 4.5 v, i d = ? 7.0 a 14.6 18 m v gs = ? 2.5 v, i d = ? 5.0 a 19 25 v gs = ? 1.8 v, i d = ? 3.0 a 25 50 v gs = ? 1.5 v, i d = ? 1.0 a 40 90 forward transconductance g fs v ds = ? 5 v, i d = ? 3.0 a 40 s charges, capacitances & gate resistance input capacitance c iss v gs = 0 v, f = 1 mhz, v ds = ? 15 v 2240 pf output capacitance c oss 240 reverse transfer capacitance c rss 210 total gate charge q g(tot) v gs = ? 4.5 v, v ds = ? 15 v; i d = ? 4.0 a 28 nc threshold gate charge q g(th) 1.0 gate-to-source charge q gs 2.9 gate-to-drain charge q gd 8.8 switching characteristics, vgs = 4.5 v (note 6) turn-on delay time t d(on) v gs = ? 4.5 v, v dd = ? 15 v, i d = ? 4.0 a, r g = 1 8.6 ns rise time t r 15 turn-off delay time t d(off) 150 fall time t f 88 drain-source diode characteristics forward diode voltage v sd v gs = 0 v, i s = ? 1.0 a t j = 25 c 0.63 1.0 v t j = 125 c 0.50 reverse recovery time t rr v gs = 0 v, dis/dt = 100 a/ s, i s = ? 1.0 a 26.1 ns charge time t a 10.2 discharge time t b 15.9 reverse recovery charge q rr 12 nc 5. pulse test: pulse width 300 s, duty cycle 2%. 6. switching characteristics are independent of operating junction temperatures.
NTLUS3A18PZ http://onsemi.com 3 typical characteristics figure 1. on ? region characteristics figure 2. transfer characteristics ? v ds , drain ? to ? source voltage (v) ? v gs , gate ? to ? source voltage (v) figure 3. on ? resistance vs. gate ? to ? source voltage figure 4. on ? resistance vs. drain current and gate voltage ? v gs , gate voltage (v) ? i d , drain current (a) figure 5. on ? resistance variation with temperature figure 6. drain ? to ? source leakage current vs. voltage t j , junction temperature ( c) ? v ds , drain ? to ? source voltage (v) ? i d , drain current (a) ? i d , drain current (a) r ds(on) , drain ? to ? source resistance ( ) r ds(on) , normalized drain ? to ? source resistance ( ) ? i dss , leakage (na) v gs = ? 1.8 v ? 2.0 v ? 4.5 to ? 2.5 v ? 1.5 v v ds ? 10 v t j = 25 c t j = ? 55 c t j = 125 c i d = ? 4.0 a t j = 25 c r ds(on) , drain ? to ? source resistance ( ) t j = 25 c v gs = ? 1.8 v v gs = ? 2.5 v v gs = ? 4.5 v v gs = ? 4.5 v i d = ? 4.0 a t j = 85 c t j = 125 c 0 2 4 6 8 10 12 14 16 18 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0 2 4 6 8 10 12 14 16 18 20 0 0.5 1 1.5 2 2.5 0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0.000 0.010 0.020 0.030 0.040 0.050 0.060 135791113151719 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 50 25 0 25 50 75 100 125 150 100 1000 10000 100000 2 4 6 8 10 12 14 16 18 20
NTLUS3A18PZ http://onsemi.com 4 typical characteristics figure 7. capacitance variation figure 8. gate ? to ? source and drain ? to ? source voltage vs. total charge ? v ds , drain ? to ? source voltage (v) q g , total gate charge (nc) figure 9. resistive switching time variation vs. gate resistance figure 10. diode forward voltage vs. current r g , gate resistance ( ) ? v sd , source ? to ? drain voltage (v) figure 11. threshold voltage figure 12. single pulse maximum power dissipation t j , junction temperature ( c) single pulse time (s) c, capacitance (pf) ? v gs , gate ? to ? source voltage (v) t, time (ns) ? i s , source current (a) ? v gs(th) (v) power (w) v gs = 0 v t j = 25 c f = 1 mhz c iss c oss c rss v ds = ? 15 v i d = ? 4.0 a t j = 25 c v ds v gs q gs q gd ? v ds , drain ? to ? source voltage (v) v gs = ? 4.5 v v dd = ? 15 v i d = ? 4.0 a t d(off) t d(on) t f t r t j = 25 c t j = ? 55 c t j = 125 c i d = ? 250 a q t 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 0 2 4 6 8 101214161820 0 2 4 6 8 10 12 14 16 18 0 1 2 3 4 5 0 5 10 15 20 25 30 1.0 10.0 100.0 1000.0 1 10 100 0.1 1.0 10.0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.15 0.25 0.35 0.45 0.55 0.65 0.75 0.85 0.95 50 25 0 25 50 75 100 125 150 0 25 50 75 100 125 150 175 200 225 100m 10 1000 1m 10
NTLUS3A18PZ http://onsemi.com 5 typical characteristics 0 10 20 30 40 50 60 70 80 figure 13. maximum rated forward biased safe operating area ? v ds , drain ? to ? source voltage (v) figure 14. fet thermal response t, time (s) ? i d , drain current (a) r(t), effective transient thermal response r ja = 72 c/w single pulse duty cycle = 0.5 0.2 0.1 0.05 0.02 0.01 v gs = ? 8 v single pulse t c = 25 c r ds(on) limit thermal limit package limit 10 s 100 s 1 ms 10 ms dc 0.01 0.1 1 10 100 0.1 1 10 100 1e+00 1e+01 1e+02 1e+03 1e ? 06 1e ? 05 1e ? 04 1e ? 03 1e ? 02 1e ? 01 device ordering information device package shipping ? NTLUS3A18PZtag udfn6 (pb ? free) 3000 / tape & reel NTLUS3A18PZtbg udfn6 (pb ? free) 3000 / tape & reel NTLUS3A18PZtcg udfn6 (pb ? free) 3000 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
NTLUS3A18PZ http://onsemi.com 6 package dimensions notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. dimension b applies to plated terminal and is measured between 0.15 and 0.30 mm from terminal. 4. coplanarity applies to the exposed pad as well as the terminals. 5. center terminal lead is optional. center terminal is connected to terminal lead # 4. 6. leads 1, 2, 5 and 6 are tied to the flag. c seating plane d b e 0.10 c a3 a a1 0.10 c udfn6 2x2, 0.65p case 517bg issue a dim a min max millimeters 0.45 0.55 a1 0.00 0.05 a3 0.13 ref b 0.25 0.35 b1 0.65 bsc d d2 e e2 0.27 bsc e 0.15 ref k l pin one reference 0.08 c 0.10 c note 4 a 0.10 c note 3 l e d2 e2 b b 3 6 6x 1 k 4 6x 0.05 c j j1 a 0.10 c b1 b 0.05 c l2 note 5 l2 j j1 0.51 0.61 2.00 bsc 1.00 1.20 2.00 bsc 1.10 1.30 0.65 bsc 0.20 0.30 0.20 0.30 bottom view mounting footprint* recommended dimensions: millimeters l1 detail a l optional constructions ?? ??? ??? 6x 0.43 2.30 1.10 0.66 1.25 0.65 pitch 6x 0.35 1 package outline 0.35 0.34 0.60 l1 --- 0.10 top view detail b side view detail a a *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. on semiconductor and are registered trademarks of semiconductor co mponents industries, llc (scillc). scillc owns the rights to a numb er of patents, trademarks, copyrights, trade secrets, and other intellectual property. a list ing of scillc?s product/patent coverage may be accessed at ww w.onsemi.com/site/pdf/patent ? marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. all operating parame ters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or a uthorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in whic h the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or us e scillc products for any such unintended or unauthorized appli cation, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unin tended or unauthorized use, even if such claim alleges that scil lc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyrig ht laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 NTLUS3A18PZ/d cool is a trademark of semiconductor components industries, llc (scillc). literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
